CLSNA' LamontCentral Forum

Kilted Carver · Kilted Carver

I had an order from a Lamont cousin to carve a strap and buckle so he could have it as a kilt pin. He wanted wood ( doesn't like the metal ones ) , and he wanted it hand done. So I did one up for him out of paduak, a awesome red and burgundy swirl wood. Heres the pics: [url=https://s741.photobucket.com/albums...

David · David

I just finished this design I call "Kimberly's Flame" named after the person who inspired it. She loves outdoor living so I crafted it from cedar to hold up to the weather. That's "covered" weather of course! I put a few velcro pads into each glass so that wind gusts or accidental bumps will keep the glas...

Drac · Drac

Since it didn't pay to start up the kiln for just one knife so I worked at knocking out a couple more with my Father-in-laws knife. Just got two of the others done so I thought post them. There wood working knives for marking instead of pencils. Top one is cocobola and the bottom one is kuri. They are sha...

Skye Clarsair · Skye Clarsair

This is my latest project. I don't actually do all the back end web design stuff (although I do speak a little html) but I do most of the writing, content, and placement of it. Hoping in the near future to make a few bucks off it in the form of ad space. www.cedarhilleats.com

Drac · Drac

Guys, The knife for the Manse ended up being used as part of an article in Blade. Jim -- Edited by Drac on Friday 4th of December 2009 09:02:16 AM

Kilted Carver · Kilted Carver

I have been wanting to make one of these for a while, I have finally got around to going to our local Tandy leather and rounding up the supplies. I bought two 72 inch pieces of latigo, one at 2 inches, one at 3/4 of an inch. I had the snaps and rivets, and brass swivels, and contact cement ( which I had also pic...

Kilted Carver · Kilted Carver

I received ( and thank goodness just recently completed) a commission to carve a stick for a retired officer from the US Army. He requested that I incorporate some of his badges, and other achievements in the carvings. So I had to carve mini badges and ribbons, and unit patches. It included: Master Jum...

Kilted Carver · Kilted Carver

[URL=https://s265.photobucket.com/albums/ii231/KiltedCarver/?action=view&current=wizardintam.jpg][IMG]https://i265.photobucket.com/albu...

Kilted Carver · Kilted Carver

[URL=https://s265.photobucket.com/albums/ii231/KiltedCarver/?action=view&current=mybodhran1.jpg][IMG]https://i265.photobucket.com/albums/...

Kilted Carver · Kilted Carver

I recieved this commission to make a corner post for a gentlemans Man-Cave. He told me to include a woodspirits face, owl, Celtic Cross, and a heart with his wifes and his initials. Trying to stay with the celtic theme heres what I came up with,..enjoy: I wrapped it up today, sanded, burned, stained, a...

Drac · Drac

Afternoon all, As most of know I have a hobby of knife making. On the forum I hang around for custom knife makers we have a game that we play. The story goes that when a group of men got board with their pocket knives they would toss them in a hat. Then thay would take turns drawing one out and you kept that o...

Kilted Carver · Kilted Carver

[URL=https://s265.photobucket.com/albums/ii231/KiltedCarver/?act...

Drac · Drac

Here is one I started when I left and finished. It is one of my EDCs with a spearpoint. The handle is some more of the USS Constitution live oak. It was to be a gift to a person I knew from active duty but I was sent back before his retirement ceremony.

Kilted Carver · Kilted Carver

I am just going to post pics now and maybe someone else will explain its use later. It has the Lamont strap and buckle, Lamont Harp, Castles Ascog(leftside) and Toward (right) and the Cowel Penninsula with the castles locations marked. Thanks for looking. [IMG]https://i265.photobucket.com/al...

LarneMan · LarneMan

This is my first CD, Of Things To Come..., recorded in 2004, released in December 2004. It contains only hammered dulcimer, and the tunes are from American Old-Time, Irish and Scottish traditions with one English tune thrown in 'cause it was just too cool a tune to leave out. It also contains a few tu...

Kilted Carver · Kilted Carver

[IMG]https://i265.photobucket.com/albums/ii231/KiltedCarver/LamontD...

Kilted Carver · Kilted Carver

I did this for a friend in Mizzou for a group he belongs to out there. Thanks for looking.

Kilted Carver · Kilted Carver

[IMG]https://i265.photobucket.com/albums/ii231/KiltedCarver/...

Drac · Drac

Hi guys, Here is probably the last one before I head out. Also the first one with a new camera that a friend recommended. It will take some playing to get it as good as some of theirs. It is still miles beyond what I could do before with the older cameras. It's ATS-34 with live oak, copper spacers and mos...

Kilted Carver · Kilted Carver

Its not really kilt related, or even Scottish/Irish. I am just happy with how she is coming along. I am beginning the finishing stages but I just had to post these, I am really digging this one. But first a little history on the place from where the design came from: [url="http://en.wikipedia.or...

Kilted Carver · Kilted Carver

I figure the title does good in explainin! TO THE PICS!!! [img]https://i265.photobucket.com/a...

Kilted Carver · Kilted Carver

[img]https://i265.photobucket.com/albums/ii231/KiltedCarver/paudakkilt...

Kilted Carver · Kilted Carver

If anyone doesn't like me posting these things here please let me know, I just like showing my things to others, but I don't want to offend anyone. I just finished these ( among other things ). Trying to get a bunch of stuff done up for upcoming shows as well as online stuff,...... and I am NOT complaning!!...

Kilted Carver · Kilted Carver

I picked up some exotic wood types at our new Woodcraft store and started messing around with the bubinga, I plan on making this into a kilt pin as soon as I finish it. [IMG]https://i265.photobucket.com...

Drac · Drac

Well, finished it up today. Not as good as I hoped but better than I expected. The blade is a Loveless Drop Point of CPM154. The handle is seraphinite with double 416 bolsters & pin. I don't know how much time before I head out to work in the shop but I am in the process of working on trading one of my kniv...

Kilted Carver · Kilted Carver

[IMG]https://i265.photobucket.com/albums/ii231/KiltedCarver/lamontcane1...

Kilted Carver · Kilted Carver

I have been making pins for a couple of weeks now, I am always trying to come up with different designs, The Trojan Horse, and The Nautilus: SeaDragon: [IMG]https://i265.photobucket.com/albums/ii23...

Topic		Started By	Replies	Views	Last Post
	Latest Batch of Kilt Pins (Preview) I had an order from a Lamont cousin to carve a strap and buckle so he could have it as a kilt pin. He wanted wood ( doesn't like the metal ones ) , and he wanted it hand done. So I did one up for him out of paduak, a awesome red and burgundy swirl wood. Heres the pics: [url=https://s741.photobucket.com/albums...	Kilted Carver	9	3305	10:57 PM Feb 21, 2010 by Luckey
	Kimberly's Flame (Preview) I just finished this design I call "Kimberly's Flame" named after the person who inspired it. She loves outdoor living so I crafted it from cedar to hold up to the weather. That's "covered" weather of course! I put a few velcro pads into each glass so that wind gusts or accidental bumps will keep the glas...	David	9	2250	08:19 PM Jan 4, 2010 by kmunik8
	Extras from Dad's Christmas Gift (Preview) Since it didn't pay to start up the kiln for just one knife so I worked at knocking out a couple more with my Father-in-laws knife. Just got two of the others done so I thought post them. There wood working knives for marking instead of pencils. Top one is cocobola and the bottom one is kuri. They are sha...	Drac	5	778	08:28 PM Dec 28, 2009 by Drac
	Is html a craft? ;) (Preview) This is my latest project. I don't actually do all the back end web design stuff (although I do speak a little html) but I do most of the writing, content, and placement of it. Hoping in the near future to make a few bucks off it in the form of ad space. www.cedarhilleats.com	Skye Clarsair	5	921	04:07 PM Dec 27, 2009 by David
	Your guy's knife made Blade Magazine (Preview) Guys, The knife for the Manse ended up being used as part of an article in Blade. Jim -- Edited by Drac on Friday 4th of December 2009 09:02:16 AM	Drac	3	718	09:06 PM Dec 7, 2009 by Luckey
	Latigo Leather Kilt Belt (Preview) I have been wanting to make one of these for a while, I have finally got around to going to our local Tandy leather and rounding up the supplies. I bought two 72 inch pieces of latigo, one at 2 inches, one at 3/4 of an inch. I had the snaps and rivets, and brass swivels, and contact cement ( which I had also pic...	Kilted Carver	4	837	01:37 PM Oct 26, 2009 by Kilted Carver
	A Walking Stick for a American Hero (Preview) I received ( and thank goodness just recently completed) a commission to carve a stick for a retired officer from the US Army. He requested that I incorporate some of his badges, and other achievements in the carvings. So I had to carve mini badges and ribbons, and unit patches. It included: Master Jum...	Kilted Carver	5	1969	09:40 AM Aug 9, 2009 by Luckey
	Mr. MacWizard (Preview) [URL=https://s265.photobucket.com/albums/ii231/KiltedCarver/?action=view&current=wizardintam.jpg][IMG]https://i265.photobucket.com/albu...	Kilted Carver	1	866	12:02 PM Jul 31, 2009 by Wood Badger
	Sprucing up my Thumper (Preview) [URL=https://s265.photobucket.com/albums/ii231/KiltedCarver/?action=view&current=mybodhran1.jpg][IMG]https://i265.photobucket.com/albums/...	Kilted Carver	0	699	08:08 PM Jul 28, 2009 by Kilted Carver
	Man Cave Celtic Totem Pole (Preview) I recieved this commission to make a corner post for a gentlemans Man-Cave. He told me to include a woodspirits face, owl, Celtic Cross, and a heart with his wifes and his initials. Trying to stay with the celtic theme heres what I came up with,..enjoy: I wrapped it up today, sanded, burned, stained, a...	Kilted Carver	6	933	08:05 PM Jul 28, 2009 by Kilted Carver
	An idea (Preview) Afternoon all, As most of know I have a hobby of knife making. On the forum I hang around for custom knife makers we have a game that we play. The story goes that when a group of men got board with their pocket knives they would toss them in a hat. Then thay would take turns drawing one out and you kept that o...	Drac	4	833	08:39 PM Jul 11, 2009 by Drac
	Fun With Extra Tartan (Preview) [URL=https://s265.photobucket.com/albums/ii231/KiltedCarver/?act...	Kilted Carver	5	773	04:58 PM Jul 8, 2009 by morris
	New one from the shop (Preview) Here is one I started when I left and finished. It is one of my EDCs with a spearpoint. The handle is some more of the USS Constitution live oak. It was to be a gift to a person I knew from active duty but I was sent back before his retirement ceremony.	Drac	2	741	08:29 PM Jul 1, 2009 by Kilted Carver
	Lamont Travlin Plaque (Preview) I am just going to post pics now and maybe someone else will explain its use later. It has the Lamont strap and buckle, Lamont Harp, Castles Ascog(leftside) and Toward (right) and the Cowel Penninsula with the castles locations marked. Thanks for looking. [IMG]https://i265.photobucket.com/al...	Kilted Carver	14	2906	01:24 PM Jun 30, 2009 by Kilted Carver
	Of Things To Come... - and more (Preview) This is my first CD, Of Things To Come..., recorded in 2004, released in December 2004. It contains only hammered dulcimer, and the tunes are from American Old-Time, Irish and Scottish traditions with one English tune thrown in 'cause it was just too cool a tune to leave out. It also contains a few tu...	LarneMan	4	864	11:53 AM Jun 26, 2009 by LarneMan
	Clan Lamont Dagger (Preview) [IMG]https://i265.photobucket.com/albums/ii231/KiltedCarver/LamontD...	Kilted Carver	8	1514	04:11 PM Jun 18, 2009 by David
	Seven Rivers Celtic Society Plaque (Preview) I did this for a friend in Mizzou for a group he belongs to out there. Thanks for looking.	Kilted Carver	1	661	08:55 PM Jun 3, 2009 by Luckey
	And yet another carved cane..... (Preview) [IMG]https://i265.photobucket.com/albums/ii231/KiltedCarver/...	Kilted Carver	0	620	06:14 PM May 31, 2009 by Kilted Carver
	Last one before heading out (Preview) Hi guys, Here is probably the last one before I head out. Also the first one with a new camera that a friend recommended. It will take some playing to get it as good as some of theirs. It is still miles beyond what I could do before with the older cameras. It's ATS-34 with live oak, copper spacers and mos...	Drac	1	651	10:11 AM May 27, 2009 by Kilted Carver
	Kispiox Totem Pole Cane (Preview) Its not really kilt related, or even Scottish/Irish. I am just happy with how she is coming along. I am beginning the finishing stages but I just had to post these, I am really digging this one. But first a little history on the place from where the design came from: [url="http://en.wikipedia.or...	Kilted Carver	1	1768	08:23 AM May 22, 2009 by Knockdow
	Shiny, Knobby Shilleleigh,.....Lets Go Floggin!! (Preview) I figure the title does good in explainin! TO THE PICS!!! [img]https://i265.photobucket.com/a...	Kilted Carver	4	1217	04:04 AM May 22, 2009 by Kilted Carver
	Paduak Leaf Knot Kilt Pin. (Preview) [img]https://i265.photobucket.com/albums/ii231/KiltedCarver/paudakkilt...	Kilted Carver	0	586	04:55 PM May 15, 2009 by Kilted Carver
	Stag Prong Handled Cane and Woodspirit Stick (Preview) If anyone doesn't like me posting these things here please let me know, I just like showing my things to others, but I don't want to offend anyone. I just finished these ( among other things ). Trying to get a bunch of stuff done up for upcoming shows as well as online stuff,...... and I am NOT complaning!!...	Kilted Carver	6	910	09:17 AM May 15, 2009 by Drac
	Bubinga Knotwork (Preview) I picked up some exotic wood types at our new Woodcraft store and started messing around with the bubinga, I plan on making this into a kilt pin as soon as I finish it. [IMG]https://i265.photobucket.com...	Kilted Carver	1	722	10:43 PM May 8, 2009 by Luckey
	Latest out of the shop (Preview) Well, finished it up today. Not as good as I hoped but better than I expected. The blade is a Loveless Drop Point of CPM154. The handle is seraphinite with double 416 bolsters & pin. I don't know how much time before I head out to work in the shop but I am in the process of working on trading one of my kniv...	Drac	5	698	09:30 PM May 1, 2009 by Drac
	One Of My Latest Cane Carvings (Preview) [IMG]https://i265.photobucket.com/albums/ii231/KiltedCarver/lamontcane1...	Kilted Carver	4	940	08:14 PM May 1, 2009 by Kilted Carver
	A Couple More Kilt Pins (Preview) I have been making pins for a couple of weeks now, I am always trying to come up with different designs, The Trojan Horse, and The Nautilus: SeaDragon: [IMG]https://i265.photobucket.com/albums/ii23...	Kilted Carver	6	836	08:07 PM May 1, 2009 by Kilted Carver
«First < 1 2 \| Page of 2 sorted by